Monitor arms for Dell UltraSharp 52 U5226KW

The Dell UltraSharp 52 U5226KW is a lot of monitor: wide, heavy, and built to run a serious desk. Holding it is not a job for an ordinary arm. A display this size puts real load and leverage on whatever carries it, and the difference between an arm that merely fits and one that holds steady, adjusts smoothly, and stays where you set it is the difference Atdec engineers for. Each of these solutions has been tested and proven for the new Dell 52 U5226KW.

52 inches of display, held without compromise.

One screen, the whole desk

ATDEC monitor arms for Dell UltraSharp 52 U5226KW

Dell's vision bringing three monitors to one neat unit - credit Dell.

For years the dense-data workstation meant a 43 inch monitor flanked by 24 or 27 inch screens in portrait each side. Dell's U5226KW consolidates that footprint into a single 21:9 panel at 6144 x 2560, with built-in speed and smarts.

But a display this commanding sitting on a stand, fixed at one height, locked at one angle, is a supercar stuck in traffic. Put it on an arm built to carry it and the whole desk answers to you: pulled close when the market moves, pushed back when it doesn't. Set to the exact height and tilt that you, and no one else, prefers.

The screen earns its place. The arm makes it yours.

Tested, balanced, proven

Here is the honest reason this page exists. Dell 52 is very new, and it sits just outside the published capacity figures for some of the arms shown below. What governs a safe, stable mount is load; a combination of size and weight. Dell's U5226KW is well within what these arms are engineered to carry.

We verified this with the actual monitor, through its full range of adjustment against our high-level performance demands. We further over-tested them - they perform beautifully.

Specify these solutions for Dell 52 U5226KW with confidence.

ATDEC AWMS-46H40 monitor arm solution for Dell 52 U5226KW

Dell UltraSharp 52 U5226KW on AWMS-46H40 monitor arm.

Solutions tested and proven for Dell 52 U5226KW

Each solution below has been tested and proven with the U5226KW. The first two are standard solutions we've preconfigured; the second two are built from individual components, listed so you can create your own.

AWMS-HXB

Dynamic monitor arm for 3D control

ATDEC AWMS-HXB FORTIS with Dell 52 UltraSharp U5226KW ON EXTENDED ARM REACH

FORTIS White

AWMS-BT75

Fixed tilt head on tall post

ATDEC AWMS-BT75 SUPER HEAVY TILT HEAD ON TALL POST FOR DELL 52 U5226KW FRONT VIEW

AWMS-BT75 Black

Atdec Modular configurations for Dell U5226KW

With listed components to create your own. Or call us!

AWMS-46H40

Powerful swing arm configuration

ATDEC AWMS-46H40 with Dell 52 UltraSharp U5226KW with arm extended

Atdec Modular AWMS-46H40 swing arm on post for Dell 52 U5226KW

Created with Atdec Modular

1 x AWM-P40G post
1 x AWM-A46HT swing arm
1 x AWM-FH HD F-clamp

AWMS-LTH40

Heavy duty tilt head with pan on post

ATDEC AWMS-LTH40 HD TILT HEAD ON POST FOR DELL 52 U5226KW SHOWN FROM REAR

Atdec Modular AWMS-LTH40 HD tilt head on post for Dell 52 U5226KW

Created with Atdec Modular

1 x AWM-P40G tall post
1 x AWM-LTHT HD tilt head
1 x AWM-LC channel clamp
1 x AWM-FH HD F-clamp

Note: AWM-A13HT replaces the head and channel clamp listed.

Frequently asked questions

Dell 52 U5226KW is outside the published size range for some of these arms. Is it safe to mount?

Yes. The published figures are conservative and have not yet been updated for a monitor this new. What governs a safe, stable mount is load, a combination of size and weight, and the U5226KW sits well within what these arms are engineered to carry. We have mounted, balanced, and operated each arm on this page with the actual monitor, through its full range of adjustment, and tested well beyond our normal performance demands. These arms are proven for this monitor; specify them with confidence, or contact us for written confirmation on a project.

Can the Dell UltraSharp 52 be mounted on a monitor arm?

Yes. The U5226KW uses a standard VESA pattern and weighs around 13 kg without its stand, so it mounts to an Atdec heavy-duty arm. We have tested and proven it on the arms shown on this page.

Does the Dell 52 U5226KW need a VESA adapter for an Atdec arm?

No. The monitor has a standard 100 x 100 VESA pattern, so it attaches to Atdec heavy-duty arms directly.

Which Atdec arm suits the Dell U5226KW?

It depends on your desk and how much you move the screen. We have proven it on the Fortis (AWMS-HXB) and AWMS-BT75, and on two Atdec Modular configurations (AWMS-46H40 and AWMS-LTH40). The videos on this page each show the monitor in place so you can judge the fit and movement.